2014 Class Rules

Jupman Fri 21 Feb - 12:59

Chasis :

Any 1:10 scale 4wd touring car chassis allowed. These chassis has to be run as intended by manufacturer. No drilling or cutting of chassis allowed.No homemade chassis or chassis parts. All Upgrades allowed as intended by manufacturer.

Dimensions:

Minimum Width 175mm

Maximum Width 200mm

Wheel Base 270mm

Minimum Height 175mm

Body:

1/10 scale touring car bodies only, no custom made wings, no covered wheel arches.

Bumpers:

Only foam bumpers allowed. These are to be mounted at the front and rear of chassis as intended. No external (on outside if body) allowed. No wood, metal or other materials for bumpers will be allowed.

Wheels:

1/10 scale touring car wheels only.

Tyres:

Moulded rubber tyres only. No foams. Maximum width is 26mm.

Motors:

Unopened 540-size silver/grey can Johnson/Mabuchi '2-slot' motors only.NO other brands allowed

21.5 brushless motor and any brushless esc but esc must be on “blinky” mode.

Note : - 21.5 Gearing is limited to under 54mm rollout.

Batteries:

7.2volt NiCad or NiMh, Lipo 7.4volt commercial packs. No Home built packs allowed.

Minimum Weight:

1380g